GE Profile Smart Indoor Smoker: Cleaning and Care

GE Profile Smart Indoor Smoker: Cleaning and Care. Allow the oven to cool completely and unplug the appliance prior to cleaning or servicing.

How to Clean Your GE Profile Smart Indoor Smoker. Allow the oven to cool completely and unplug the appliance prior to cleaning or servicing. Cleaning your smoker after each use will maintain longevity and proper performance.
Clean the smoker exterior with a sponge or soft cloth and a solution of mild soap and water or vinegar and water. Rinse with clean water and dry with a soft cloth. Remove all accessories and racks from the smoke chamber. Wipe all interior surfaces of the smoker with a sponge or soft cloth and a solution of mild soap and water or vinegar and water. Over time, the pellet ramp can accumulate buildup that prevents waste pellets from properly falling into the waste bin.

To clean the pellet ramp, locate the smoke-inlet cover on the right hand wall of the smoking chamber. Open the inlet gate by sliding it upward. Then use the included wire brush to scrub the pellet ramp, which is located just behind the pellet outlet cover.
Clean the pellet ramp occasionally or if ash is found inside the smoking chamber. It is recommended to clean the glass cover of the smoke chamber light after each use. Wipe the cover with a sponge or soft cloth and a solution of mild soap and water or vinegar and water.

GE Profile Smart Indoor Smoker: Cleaning and Care

How to Dispose of the Waste Bin

After each use, the waste, water and pellets in the waste bin should be disposed. Pull the waste bin carrier out completely from the front of the smoker, then remove the waste bin from the carrier, taking care not to lose the waste.
Pour the waste water through a strain down the drain, taking care to separate any solid pellet waste. It is not recommended to use a garbage disposal to dispose of the waste pellets. The solid pellet waste may then be discarded in the trash. To clean the waste bin, simply wash the waste bin with a sponge or soft cloth and soapy water for light soiling.

Conclusion

Cleaning your smoker after each use will maintain longevity and proper performance. Clean the smoker exterior with a sponge or soft cloth and a solution of mild soap and water or vinegar and water. Rinse with clean water and dry with a soft cloth. After each use, the waste, water and pellets in the waste bin should be disposed. It is not recommended to use a garbage disposal to dispose of the waste pellets. The solid pellet waste may then be discarded in the trash.
For more helpful cleaning and care tips, please refer to the user manual. The temperature probe may be cleaned with soap and. water or a soapfilled scoring pad. Cool the temperature probe before cleaning, then rinse and dry. The wire racks and rack supports are also safe to be washed in an automatic dishwasher.

Notice: Internet users spontaneously contributed the article content, and the article views only represent the author himself. This site only provides storage services, does not have ownership, and bears relevant legal liabilities. If you find plagiarism, infringement, or illegal content, please contact the administrator to delete it.